1 General information
4
SMGB0077 rev.0 - 01/2013
1.3 Product guide
1.3.1 Classication of indoor unit models
Unit type (indoor unit): RCI, RCIM, RCD, RPC, RPI, RPIM, RPK, RPF, RPFI
Position-separating hyphen (îš¿xed)
Capacity (HP): 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0
FS = SYSTEM FREE
N = R410A refrigerant
H = Hotel (RPK-(0.8/1.5) only)
2/3/4 = series
E = Made in Europe
M = Made in Malaysia
– = Made in Japan
i = Version up (RCI only)
DU = Drain Up (RPIM only)
XXX – X.X FS N (H) X (X) (i) (-DU)
1.3.2 Classication of KPI models
KPI energy / heat recovery unit
Position-separating hyphen (îš¿xed)
Capacity (m
3
/h): 250, 500, 800, 1000, 1500, 2000, 3000
2 = 1 ~ 230V 50Hz
E = energy recovery
H = Heat recovery
X = Active (Energy recovery + DX section)
3 = series
E = Made in Europe
KPI – (Y)YY 2 Y 3 E
1.3.3 Classication of DX-Interface models
DX-Interface type
Position-separating hyphen (îš¿xed)
Capacity (HP): 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0
E = Made in Europe
1 = series
EXV – X.X E 1
To Next Page
Loading...
Need help?
General
