10 Servicing
359
10
SMGB0077 rev.0 - 01/2013
10.8.2 Removal of the inlet and outlet air thermistors
Inlet air thermistor
Nº Part
1 Tie
2 Cable clamp
3 Thermistor
N O T E
To disconnect and remove the appropriate thermistor,
previously see the chapter corresponding to the wiring
diagrams in this Manual.
Nº Part
1 Location of the air inlet thermistor
2 Rear cover
Remove the screws securing the rear cover of the unit.
Disconnect and remove the thermistor.