Version 2.0, February 2012. Copyright 2012 Hitron Technologies
18
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
18
1.3 LEDS
This section describes the CGN2’s LEDs (lights).
CABLE Use this to connect to the Internet via an F-type RF
cable.
POWER Use this to connect to the 12v/2A power adapter that
came with your CGN2.
NEVER use another power adapter with your
CGN2. Doing so could harm your CGN2.
Figure 3: Power Adaptor
Table 2: Hardware Connections