Version 2.0, February 2012. Copyright 2012 Hitron Technologies
53
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
53
Figure 15: The WAN/LAN > Backup Screen
The following table describes the labels in this screen.
Table 15: The LAN > Backup Screen
Backup/Restore Setting
Backup Settings
Locally
Click this to create a backup of all your CGN2’s settings
on your computer.
Restore Settings
Locally
Use these fields to return your CGN2’s settings to those
specified in a backup that you created earlier.
Click Choose File to select a backup, then click
Restore to return your CGN2’s settings to those
specified in the backup.
Reboot/Factory Reset
Reboot Click Reboot to restart your CGN2.
Factory Reset Click Factory to return your CGN2 to its factory default
settings.
NOTE: When you do this, all your user-configured
settings are lost, and cannot be retrieved.
Help Click this to see information about the fields in this
screen.