Hitron CGN2 - Advanced Wireless Settings

Version 2.0, February 2012. Copyright 2012 Hitron Technologies
95
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
95
HITRON CGN2 USER’S GUIDE
6.4 THE ADVANCED SCREEN
Click Wireless > Advanced. The following screen displays.
MAC Address This displays the MAC address of each network device
that has connected to the CGN2 on the wireless
network.
Add Select a device’s checkbox and click Add to add the
device to the Wireless Control List.
Manually-Added Wireless Devices
Device Name Enter the name to associate with a network device that
you want to permit or deny access to the CGN2 and the
network wirelessly.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
MAC Address Specify the MAC address of the network device that you
want to permit or deny access to the CGN2 and the
network wirelessly.
Add Click this to add any Manually-Added Wireless
Devices, and Auto-Learned Wireless Devices with
their Add boxes checked, to the Wireless Control List.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 28: The Wireless > Access Control Screen (continued)