Version 2.0, February 2012. Copyright 2012 Hitron Technologies
35
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
35
The following table describes the labels in this screen.
Table 8: The Status > System Info Screen
Device Information
System Time This displays the current date and time.
System Uptime This displays the number of days, hours, minutes and
seconds since the CGN2 was last switched on or
rebooted.
Model Name This displays the device’s model name.
SW Version This displays the version number of the software that
controls the CGN2.
HW Version This displays the version number of the CGN2’s physical
hardware.
RF MAC This displays the Media Access Control (MAC) address of
the CGN2’s RF module. This is the module that connects
to the Internet through the CATV connection.
Serial Number This displays a number that uniquely identifies the device.
RG Status This displays whether or not the CGN2 is in Residential
Gateway (RG) mode.
When the CGN2 is in Residential Gateway mode, ON
displays. When the CGN2 is not in Residential Gateway
mode, OFF displays.
Wifi Status This displays whether or not the CGN2’s wireless network
is active.
When the CGN2’s wireless network is active, ON displays.
When the CGN2’s wireless network is not active, OFF
displays.
NAT Status This displays whether or not the CGN2’s Network Address
Translation (NAT) feature is active.
When NAT is active, ON displays. When NAT is not active,
OFF displays.
DHCP Status This displays whether or not the CGN2’s DHCP server is
active.
When the DHCP server is active, ON displays. When the
DHCP server is not active, OFF displays.
Firewall Status This displays whether or not the CGN2’s firewall is active.
When the firewall is active, ON displays. When the firewall
is not active, OFF displays.
To Next Page
Loading...
Need help?
General
