Version 2.0, February 2012. Copyright 2012 Hitron Technologies
36
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
36
WAN Information
WAN Address This field displays the CGN2’s IP address on the WAN
(Wide Area Network) interface.
Subnet Mask This field displays the CGN2’s WAN subnet mask.
Gateway Address This field displays the address of the device on the WAN
to which the CGN2 is connected.
DNS Server This field displays the Domain Name Servers that the
CGN2 uses to resolve domain names into IP addresses.
Uptime This displays the number of hours, minutes and seconds
that the CGN2 has been connected to another device over
the WAN interface.
Traffic Count This displays the number of bytes received and sent on
the WAN interface.
Wireless Information
SSID This displays the wireless network’s Service Set Identifier.
This is the name of the wireless network, to which wireless
clients connect.
Wireless Mode This displays the type of wireless network that the CGN2
is using.
Channel This displays the wireless channel on which the CGN2 is
transmitting and receiving.
Security Type This displays the type of security the CGN2’s wireless
network is currently using.
Cipher type This displays the type of encryption that the wireless
network’s security is using:
TKIP displays if it is using the Temporal Key Integrity
Protocol.
AES displays if it is using the Advanced Encryption
Standard.
TKIP and AES displays if it allows clients using either
encryption type to connect to the CGN2.
SSID MAC This displays the Media Access Control (MAC) address of
the wireless module, to which wireless clients connect.
LAN Status
MAC Address This displays the Media Access Control (MAC) address of
the CGN2’s Ethernet module. This is the module to which
you connect through the LAN ports.
Table 8: The Status > System Info Screen (continued)
To Next Page
Loading...
Need help?
General
