Version 2.0, February 2012. Copyright 2012 Hitron Technologies
43
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
43
Click Status > Capability. The following screen displays.
Figure 11: The Status > Capability Screen
The following table describes the labels in this screen.
Table 11: The Status > Capability Screen
Residential Gateway
function
Select the checkbox to enable the CGN2’s residential
gateway features, or deselect the checkbox to disable
them.
UPnP Select the checkbox to enable the CGN2’s Universal
Plug n Play features, or deselect the checkbox to
disable them.
HNAP Select the checkbox to enable the CGN2’s Home
Network Administration Protocol features, or deselect
the checkbox to disable them.
USB Select the checkbox to enable the CGN2’s USB media
sharing capability, or deselect the checkbox to disable
them.
NOTE: This option is available to logged-in MSO users
only.
When you select this checkbox and apply your changes,
the CGN2 reboots. Once it has successfully rebooted,
the WAN/LAN > Shared Media screen displays in the
cusadmin user interface.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
To Next Page
Loading...
Need help?
General
