Version 2.0, February 2012. Copyright 2012 Hitron Technologies
93
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
93
HITRON CGN2 USER’S GUIDE
6.3 THE ACCESS CONTROL SCREEN
Use this screen to configure Media Access Control (MAC) address filtering on the
wireless network.
NOTE: To configure MAC address filtering on the wired LAN, see The Filter Setting
Screen on page 57.
You can set the CGN2 to allow only certain devices to access the CGN2 and the
network wirelessly, or to deny certain devices access.
Click Wireless > Access Control. The following screen displays.
Figure 30: The Wireless > Access Control Screen
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 27: The Wireless > Setup Screen (continued)
To Next Page
Loading...
Need help?
General
