Version 2.0, February 2012. Copyright 2012 Hitron Technologies
92
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
92
WPA_Personal
NOTE: These fields display only when you select WPA-Personal from the Security
Mode list.
WPA Mode Select the type of WPA security that you want to use:
Select WPA-PSK to use Wifi Protected Access (Pre-
Shared Key) mode
Select WPA2-PSK to use Wifi Protected Access 2
(Pre-Shared Key) mode
Select Auto (WPA-PSK or WPA2-PSK) to allow
clients operating in either mode to connect to the
CGN2.
Cipher Type Select the type of encryption that you want to use:
Select TKIP to use the Temporal Key Integrity
Protocol.
Select AES to use the Advanced Encryption
Standard.
Select TKIP and AES to allow clients using either
encryption type to connect to the CGN2.
Group Key Update
Interval
Enter the frequency (in seconds) with which you want
the CGN2 to create new pre-shared keys, and issue
them to the wireless client.
Pre-Shared Key Enter the pre-shared key that you want to use for your
wireless network. You will need to enter this key into
your wireless clients in order to allow them to connect to
the network.
Pre-Authentication Use this field to allow pre-authentication (Enable) in
WPA2, or deny pre-authentication requests (Disable).
In preauthentication, a WPA2 wireless client can
perform authentication with other wireless access points
in its range when it is still connected to its current
wireless access point. This allows mobile wireless
clients to connect to new access points more quickly,
permitting more efficient roaming.
Apply Click this to save your changes to the fields in this
screen.
Table 27: The Wireless > Setup Screen (continued)
To Next Page
Loading...
Need help?
General
