Version 2.0, February 2012. Copyright 2012 Hitron Technologies
42
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
42
Figure 10: The Status > Password Screen
The following table describes the labels in this screen.
2.6 THE CAPABILITY SCREEN
Use this screen to enable or disable the CGN2’s residential gateway and Universal
Plug n Play (UPnP) functions.
Disabling the residential gateway feature sets the unit to use bridge mode only. Use
this mode when your network is already using another router.
Table 10: The Status > Password Screen
Enter Current Password Enter the password with which you currently log into the
CGN2
Enter New Password Enter and re-enter the password you want to use to log
into the CGN2.
Re-enter New Password
Password Idle Time Enter the number of minutes of inactivity after which you
should be automatically logged out of the CGN2. Once
this period elapses, you will need to log in again.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
To Next Page
Loading...
Need help?
General
