Version 2.0, February 2012. Copyright 2012 Hitron Technologies
58
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
58
HITRON CGN2 USER’S GUIDE
NOTE: To configure MAC address filtering on the wireless network, see The Access
Control Screen on page 93.
You can set the CGN2 to allow only certain devices to access the CGN2 and the
network, or to deny certain devices access.
NOTE: To see a list of all the computers connected to the CGN2 on the LAN, click
the Connected Computers button in the Firewall > IP Filtering,
Forwarding, Port Triggering or Firewall Options screens.
You can turn IP filtering on or off, and configure new and existing IP filtering rules.
Click Firewall > Filter Setting. The following screen displays.
To Next Page
Loading...
