Version 2.0, February 2012. Copyright 2012 Hitron Technologies
88
Version 2.0, February 2012. Copyright 2012 Hitron Technologies
88
Wireless Mode Select the type of wireless network that you want to use:
11B/G Mixed: use IEEE 802.11b and 802.11n
11B Only: use IEEE 802.11b
11G Only: use IEEE 802.11g
11N Only: use IEEE 802.11n
11G/N Mixed: use IEEE 802.11g and 802.11N
11B/G/N Mixed: use IEEE 802.11b, 802.11g and
802.11N
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network. If in doubt, use 11B/G/N (default).
Channel Select the wireless channel that you want to use, or
select Auto to have the CGN2 select the optimum
channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
WPS ON/OFF Use this field to turn Wifi Protected Setup (WPS) on or
off.
Select ENABLE to turn WPS on.
Deselect DISABLE to turn WPS off.
Table 27: The Wireless > Setup Screen (continued)
To Next Page
Loading...
Need help?
General
