Hobart Multi-Handler 200 - Generator; Inverter Requirements

. A complete Parts List is available at www.HobartWelders.com
OM-285922 Page 21
5-7. Generator / Inverter Requirements
Minimum auxiliary power require-
ment at rated load is 10 KW continu-
ous/12.5 KW peak at 240 volts AC
for full output. Smaller generators
will reduce output capability.
! Engine Control Switch must be set at “RUN”
position − not “RUN/IDLE”.
! Set generator Fine Adjustment Control
to 10 for maximum auxiliary power.
Generator settings, if applicable.
Notes