Trident HD Specimen Radiography System User Guide
Chapter 3: Components, Controls, and Indicators
Page 22 MAN-05478-002 Revision 003
3.6 How to Log Out
1. In the Procedure screen, select the Close Patient button.
2. In the Select Patient screen, select the Close button.
3. At the Startup screen, select the Log Out button. At the confirmation prompt, select
the Yes button. The Login screen opens.
3.7 How to Turn Off the System
1. Close any open patient procedures.
2. In the Select Patient screen, select the Close button.
3. At the Startup screen, select the Shutdown button. At the confirmation prompt, select
the Yes button. The computer system shuts down but the console remains on.
4. To shut down the console, turn OFF the system power switch on the back of the
console.
3.7.1 How to Remove All Power from the System
1. Make sure that the computer system and console are completely turned OFF.
2. Disconnect the power cord from the electrical outlet.
To Next Page
Loading...
