Hologic Trident - How to Shutdown the System; How to Remove All Power from the System

Trident User Guide
Chapter 3: Components, Controls, and Indicators
MAN-02098 Revision 008 Page 17
3.7 How to Shutdown the System
1. Select the Close Patient button in the Procedure screen.
2. From the Select Patient screen, select the Log Out button.
3. From the Startup screen, select the Shutdown button. A prompt displays the option to
continue with the system shutdown.
4. Select the Yes button to shutdown the system .
3.7.1 How to Remove All Power from the System
Table 1: Removal of All Power from the System
System without the optional UPS System with the optional UPS
1. Make sure the system is completely
turned off.
2. Disconnect the power strip from the
wall.
1. Make sure the system is completely
turned off.
2. Press and hold the UPS power button
for five seconds.
3.
Press the down arrow button to change
the on screen selection to “Yes”.
4. Press the enter button (left arrow).
5.
Press the down arrow button to change
on screen selection to “Off – No
Delay”.
6. Press the enter button (left arrow).
7. Disconnect the UPS from the wall.