Hologic Trident - How to Remove the Keyboard Cover (if Equipped)

Trident User Guide
Chapter 8: Maintenance, Cleaning, and Disinfecting
Page 50 MAN-02098 Revision 008
8.2.3 How to Clean Keyboard Cover (if Equipped)
Note
Remove the keyboard cover from the keyboard before
cleaning the cover.
1. Remove the cover from the keyboard (see How to Remove the Keyboard Cover (if
Equipped) on page 48).
2. Clean the silicone cover using these cleaning/disinfectant materials:
• Alcohol-based cleaning products
• Chlorine bleach disinfectant wipes products
• 10% bleach solution
• 10% hydrogen peroxide
• Disinfectant wipes
• Soap and water
Note
Do NOT use the following fluids or actions to clean the
cover:
- petroleum-based cleaning fluids such as gasoline (petrol),
turpentine, or oil
- acetone
- cleaning fluid with over 10% bleach
- temperature sterilization
- abrasive scrubbing pads
8.2.4 How to Clean the Keyboard
Clean the key surfaces with a clean cloth. If material falls between the keys, clean the
keyboard with a vacuum. If liquids enter the keyboard, or fluids are spilled onto the
keyboard, call the Hologic Technical Support for guidance or replacement.
If the keyboard comes in contact with body fluids, the keyboard will require disinfecting.
Use a commercially available product or alcohol for this purpose. Do not use bleach or
hydrogen peroxide on the keyboard itself.