Honeywell 30 Series User Guide

x
About This Document
This document introduces the Honeywell 30 Series Network Video Recorder. It explains how to
operate the Network Video Recorder.
This document is intended for installers and users.
Overview of Contents
This document contains the following chapters:
• Chapter 1, Introduction, describes the features, front and rear panel layout of the NVR.
• Chapter 2, Getting Started, describes how to connect the NVR and log on to its user
interface.
• Chapter 3, Viewing Live Video, describes the NVR’s real-time monitoring mode and
associated NVR operations, including controlling a PTZ camera (if connected).
• Chapter 4, Recording Video, describes how to manually record a video clip and how to set
up automatic recording.
• Chapter 5, Playing Back and Search Videos, describes how to search for and play back
recorded video, and how to save recorded files to an external storage device.
• Chapter 6, Settings, describes how to configure NVR settings.
• Chapter 7, Management over a Web Console, describes how to operate the NVR’s through
web client.
Special Fonts and Symbols
Italic
Indicates referenced chapter, figure number, page number, etc. In
the electronic version,
click on italicized text to switch to the
corresponding page.
Bold
Indicates a button
, or menu item.
Note
Alerts the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
How to Use This Document
• Pictures in this manual are for reference only, please see the actual items for details.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)