30 Series Network Video Recorder User Guide
52
Figure 6-37 User
The User page allows you to create more users, to change user password, and place
limitations on users' privileges and administration rights. Up to 16 users can be created,
including the default administrator.
By default, there are two user groups: Administrator and Regular user.
• The administrator users can access all cameras recruited in the configuration; while the
regular users can be configured to have access to some or all cameras.
• The regular users cannot access the Settings window, meaning that regular users cannot
add or remove cameras, make changes to alarm, network, and all other system settings.
When users try to access the Settings window, the login window prohibits regular users to
log in.
The system blocks out the video feeds from users who are denied of the access to particular
cameras. The alarms and the alarm-triggered recordings from those cameras will also be
inaccessible for unauthorized users.
Note
The default name and password for administrator group are admin and
admin. It is highly recommended to change the default password to
prevent unauthorized access to the system.
Creating a User
1. Click in Figure 6-36 and the following window is displayed:
To Next Page
Loading...
Need help?
General
