30 Series Network Video Recorder User Guide
48
within your network. You can use the Auto Setup button to automatically update the
daylight-saving configuration. A system reboot is required.
• Manually update the daylight-saving profile in the GZ format using the Import file button
below.
Click Apply for the configuration to take effect.
Note
If the NTP
time server configuration (Auto) is preferred, the
system will automatically configure all cameras to be listening
to the system, and therefore to the same time server.
Setting-System-Maintenance
Go to Maintenance.
Figure 6-31 Maintenance
On this window, you can perform 4 maintenance tasks:
• Update firmware –Download firmware and save it to a USB drive in the FAT format, attach
the USB device to the NVR for firmware upgrade.
• Update device pack–A device pack allows you to import associated configurations and
parameters for new camera models so that these cameras can be integrated into your
NVR configuration. The information in the device pack is related to some tunable
parameters.
To Next Page
Loading...
Need help?
General
