Honeywell 30 Series User Guide

Settings
31
Figure 6-6 Camera Network
You can select DHCP as the method for cameras to acquire IP addresses, or you can manually
configure static IPs for a single or all cameras.
It is usually not necessary to change port numbers for the HTTP and RTSP ports unless there
is a conflict in your network environment.
Camera Position
Go to  ManagementCamera position.
Figure 6-7 Edit Camera Position

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)