Settings
59
By default, the NVR service and video streaming are accessed via HTTP port 80 and RTSP port
554. You can designate a different port number if the need arises. Usually it is not necessary
to change these ports. HTTPS encrypted connection is enabled by default.
Settings-Network-P2P
You can easily connect to the unit using a mobile device with the HVMV APP using the P2P
screen. To use this option, you will need the HVMV APP downloaded, installed, and have
registered/created an account. When the APP is setup, go to Device Management
P2P and
use the camera to view the QR code on the P2P screen. The device’s information and
connection will automatically be downloaded to the APP and you can now connect to the NVR
using your mobile device.
Go to P2P.
Click to enable this option.
Figure 6-47 P2P Setting
To Next Page
Loading...
Need help?
General
