Honeywell 30 Series User Guide

30 Series Network Video Recorder User Guide
54
Removing a User
1. Click in Figure 6-36 and the remove button will turn yellow .
2. Mouse over to the user you want to remove, and its entry will display the Remove
message.
3. Click on the Remove message.
Setting-Login/Logout
Go to  User.
Select related settings of login/logout.
Figure 6-39 Login/Logout
Setting-Storage
Creating a Volume
Before creating the volume, make sure the HDDs have been properly installed.
Go to  Storage.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)