Honeywell 30 Series - Adding a Camera; Removing a Camera

Settings
29
Adding a Camera
Go to  ManagementAdd/edit.
4. Click and a list of cameras in the same subnet will appear:
Figure 6-3 Adding a Camera
5. Click Honeywell or ONVIF to select the camera protocol.
Note
30 series cameras that support the Honeywell protocol:
HC30W42R3
HC30W45R3
HC30W45R2
HC30WB2R1
HC30WB5R1
HC30WB5R2
HC30WE2R3
HC30WE5R3
HC30WE5R2
HC30WF5R1
HC60W35R2
HC60W35R4
HC60W45R2
HC60W45R4
HC60WB5R2
HC60WB5R5
HC60WZ2E30
6. Click Add and the camera will be placed at an unoccupied position. You may also expand
the menu on the side of the Add button to select a position number.
7. When a camera is added, it should appear on the graphical placement below.
8. Click Apply after you added cameras.
9. You may click to return to the previous window.
Removing a Camera
Go to  ManagementAdd/edit.
1. Click and the remove button will turn yellow .