Honeywell 30 Series User Guide

30 Series Network Video Recorder User Guide
30
Figure 6-4 Removing a Camera
2. Mouse over to the camera you want to remove, and its entry will display the Remove
message.
3. Click the Remove message and a confirm window prompted:
Figure 6-5 Confirm Message
4. Click Continue to remove the camera.
Network
Go to  ManagementNetwork.
Here you can configure the network type, IP address, and the connection ports for video
streaming.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)