Settings
49
• Backup –You can back up your system configuration using the Backup function. Click
Backup, a message window will prompt. Click Save to preserve your system
configurations.
Select a location for your backup file, then click Save to complete the process. If you back
up to a USB thumb drive, that thumb drive must be formatted using the FAT format.
Note
The backup action does not involve the following:
• Recorded videos and database.
• Alarm records
• Restore–If you have a previously-saved profile, you can restore your previous
configuration. Click Restore. A file location window will prompt. Locate the backup file and
click Open. The Restore process will take several minutes to complete, and system
operation will be interrupted during the process.
• Reboot – Click the button to reboot NVR.
Figure 6-32 Reboot
• Shutdown – Click the button to shutdown NVR.
Figure 6-33 Shutdown
Refer to the following table for detailed information on compatible USBs.
Table 6-3 Compatible USB Table
Brand Specification
Transcend TS8GJF370 8GB, USB2.0, Pen Drive, Classic, White
SanDisk SDCZ73-032G-G46, SanDisk Ultra Flair USB 3.0 32GB
To Next Page
Loading...
Need help?
General
