Honeywell 6808 - Page 73

6808 Manual — P/N LS10146-001SK-E:C 09/28/2017 73
Network Management
Network
Programming
(cont.)
Access Codes
Select Profile
(01 - 20)
Panel Functions
Event History
Profile 1 is the profile that
dictates what functions the
Firefighter Key has access to.
Because this is the profile for a
keys, the user name and the
access code can not be edited
for this profile.
Profile 2 is the profile for the
installer and is referred to as the
“Installer Code”. This profile’s
user name and panel functions
can not be edited.
See Section 6.2.5.
Set Time & Date
Network Diagnostics
Network
Programming
Panel Programming
System Information
Multi-Site
Upload/Download
F1 Function Key
F2 Function Key
F3 Function Key
F4 Function Key
Send/Receive
Firmware Update
Communicator
Options
Communicator
Assignments
Select Panel Primary 0= unused See Section 6.2.6
Communicator
Miscellaneous
SIA Options
Enable pi SIA Modifier See Section ,
“Communicator
Miscellaneous”
Include Panel ID in SIA Reporting
Receiver
Configuration
Select Panel Select Receiver
Receiver
Number
See Section ,
“Receiver
Configuration”
Receiver Format
Contact ID
SIA500
SIA8
SIA20
eVance
Ethernet
Cellular
UNUSED
Receiver Credentials
Communicator Report Table
Panel
See Section , “Communicator
Reporting Table”
Report Alarms
Report Supervisory
Report Troubles
Report Events by
Point
Primary Receiver
Primary Account
Test Primary Account
Secondary Receiver
Secondary Account
Test Secondary
Account
Menu Options/Defaults Comments