EasyManua.ls Logo

Honeywell CIPer 50 - Page 64

Honeywell CIPer 50
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CIPer
TM
MODEL 50 CONTROLLER INSTALLATION AND COMMISSIONING INSTRUCTIONS
31-00233-02
64
To can make up your own RJ-45 to conventional to RS-232 DB-9 female connecting cable using a
standard Ethernet cable with the one end cut off. The standard color codes are:
Pin 2 / RxD (receive data) = Orange
Pin 3 / TxD (transmit data) = White/Green
stripe
Pin 5 / GND = White/Blue Stripe
For proper serial communication:
Tx on your host (laptop) must go to Rx on the
CIPer50
Tx on the CIPer50 must connect to Rx on your host
so your Wire PIN 2 <> PIN 3 and PIN 3 <> PIN 2.
At the RS-232 DB-9 female connection:
Orange > DB-9 pin 3
White/Green > DB-9 Pin 2
White/Blue > DB-9 Pin 5
NOTE
TECHTOO USB 3.0 to Serial Adapter USB RS232 Cable USB
Serial Cable Converter DB9 USB (10ft) with FTDI Chipset Gold
Plated for
Win10/8.1/8/7/Vista/XP/2000/Android/Linux/Mac OS
X10.6 & Above.
YIOVVOM DB9 Breakout Connector to Wiring Terminal RS232
D-SUB Male Serial Adapters Port Breakout Board Solder-Free
Module with case (Female Serial Adapter).

Table of Contents

Other manuals for Honeywell CIPer 50

Related product manuals