Honeywell ControlEdge 2020 SC-TEPR01

See the following table for the relevant configuration.
Item Go to...
1 See "Hardware" on page15 for more information.
See "I/O network topologies" on page1 for more information.
2 See "Software" on page41 for more information.
See "Operating" on page67 for more information.
3 See "Configuring Modbus " on page83 for more information.
See "Modbus Slave Configuration" on page1 for more information.
4 See "Configuring OPC UA " on page94 for more information.
5 See "CDA Configuration" on page1 for more information.
6 See "FDM integration" on page115 for more information.
7 See "Security" on page119 for more information.
8 See "Configuring Wireless I/O" on page111 for more information.
9 See "Configuring EtherNet/IP devices" on page92 for more
information.
14
Chapter 2 - Overview