43
l The project name must not contain any of the following
characters: '.\/:*?"<>|'.
l The project name must not exceed 24 characters.
l The directory path length must not exceed 171 characters.
5. Click Save. A project is created and the Home Page appears. Take
the home page of ControlEdge 900 controller as an example here.
Item Description
1 This area contains toolbar and menu bar. You can
navigate to IEC Programming Workspace, compile a
project, build a project, debug on/off, etc.
2 This area contains the following options: open an
existing project, connect a controller, upgrade a
project and download a project.
3 This area contains configuration options for the
controller and project. You can configure the IP
address, configure I/O, upgrade firmwares and
program the project, etc.
For more information, see "Creating a project" in the ControlEdge
Builder User's Guide.
Chapter 4 - Software
To Next Page
Loading...