Model IFP-2100/ECS Installation Manual LS10143-001SK-E
8-21
Point
(cont.)
Internal Power
and External
Power (cont.)
Enter Pt /Select
Function
Select
Sensor
B SWITCH
ECS INPUT
If ECS INPUT is selected
choose associated EVENT
ECS TAMPER Latch and Non-Latch feature
only appear for WATERFLOW,
FIRE SUPERVISORY, FIRE
TAMPER, ZONE AUX1, ZONE
AUX2, SYSTEM AUX1,
SYSTEM AUX2., ECS INPUT,
ECS TAMPER, and ECS
SUPERVISORY
ECS SUPER-
VISORY
STATUS POINT
Enter Pt /Select
Function (cont.)
A SWITCH Same as B SWITCH
Section 9.5.3
B
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
CO 4 WIRE
SUP DET
Latch
Non-Latch
A
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
CO 4 WIRE
SUP DET
Latch
Non-Latch
Select Group or Zone Number Group or Zone selection will
appear depending on the
function selected
Edit Name Enter Name
5496 Edit Point #
UNUSED
Section 9.5.5
B NOTIF
Control Circuit
Notif Output
Select Group
Super-vised
Yes or No
A NOTIF
AUX_PWR
Constant
Edit Name
Aux Sync
Aux Door
Aux Reset
5880/5865/ECS-
Series Amplifiers
Enter Point #
UNUSED
Section 9.5.4 and Section 9.5.6
NOTIF
Select Group
Edit Name Enter Name
ECS-VCM/ECS-
RVM/ECS/NVCM
Enter Pt /Select Function
UNUSED
Section 9.5.7
SWITCH
MANUAL PULL
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
Menu Options/Defaults Comments
To Next Page
Loading...
