Introduction
1
1 Introduction
This chapter contains the following sections:
• Overview, page 1
• Key Features, page 1
Overview
Honeywell 30 Series IP cameras integrate traditional camera and network video technology,
combining video data collection and transmission. These flexible, fully featured cameras are
the ideal choice for a wide range of indoor and outdoor surveillance applications.
Plug-and-play compatible with Honeywell 30 Series Network Video Recorder, the cameras
offer 2 or 5 megapixel resolution at up to 30 frames per second and use video compression
technology to save bandwidth and storage while ensuring maximum video quality. All the
cameras are True Day/Night with intelligent IR capability, providing up to 165 ft (50 m) of
illumination in low-light and nighttime scenes. Also, all the cameras support WDR function at
up to 120 dB.
Each camera comes with configurable motion detection and camera tamper detection and
supports up to 5 user-defined privacy mask areas. In addition to a 12 VDC adapter, all the
cameras support Power over Ethernet (PoE), eliminating the need for a separate power supply
and associated wiring. All models also support local video storage on microSDHC cards (up to
128 GB) when network service is interrupted.
Key Features
Key features of the Honeywell 30 Series IP cameras include the following:
Camera
•
Day/Night mode auto-switch
•
Video parameter setup, such as electronic shutter and gain
•
Motion detection
•
Camera tampering detection
•
People detection
•
Wide dynamic range
•
IR night vision
•
Fisheye dewarping
Storage
•
Central server backup (configure in Event settings)