Performance Series IP Camera Software Configuration Guide
80
8 Configuring System Settings
This chapter contains the following sections:
• Configuring System General Settings, page 80
• Configuring Maintenance Settings, page 81
• Configuring User Accounts Settings, page 86
• Configuring Access List Settings, page 87
Configuring System General Settings
Go to Setup System Setup General Settings.
This section explains how to configure the basic settings for the camera, such as the host
name and system time.
Figure 8-1 Configuring System General Settings
Host Name: Enter a name for the camera. The text will be displayed at the top of the main
page.
Turn off the LED indicators: If you do not want others to notice the network camera is in
operation, you can select this option to turn off the LED indicators.
Time zone: Select the appropriate time zone from the dropdown list. If you want to upload
Daylight Savings Time rules, see Configuring Maintenance Settings on page 81 .
To Next Page
Loading...
