Performance Series IP Camera Software Configuration Guide
58
1. Click New to add a new intrusion detection window.
2. In the Window Name text box, enter a name for the intrusion detection window. To delete
a window, click the mark on the right of the window name.
3. Draw a detection area by clicking four corner points on the target area. You can change
the shape of the detection area by dragging the corner points.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.
People Detection
The People Detection detects and traces people motions in customized windows. If a people
motion is detected, a flashing red window will frame the head of the people and follow the
motion of the people.
Figure 6-5 People Detection
To enable people detection:
1. Click New to add a new people detection window.
2. In the Window Name text box, enter a name for the people detection window. To delete a
window, click on the right of the window name.
3. Draw a detection area by clicking four corner points on the target area. You can change
the shape of the detection area by dragging the corner points.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
