Honeywell HF680 Series User Manual

Name: Honeywell HF680 Series
Brand: Honeywell
Rating: 4 (1 reviews)

190 pages

To Next Page

To Previous Page

HF680 Series User Guide 93

EAN/JAN-13 Check Digit

This selection allows you to specify whether the check digit should be transmitted

at the end of the scanned data or not. Default = On.

EAN/JAN-13 Addenda

This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.

Default = Off for both 2 Digit and 5 Digit Addenda.

EAN/JAN-13 Addenda Required

When Required is scanned, the scanner will only read EAN/JAN-13 barcodes that

have addenda. Default = Not Required.

* On

Off

2 Digit Addenda On

* 2 Digit Addenda Off

5 Digit Addenda On

* 5 Digit Addenda Off

Required

Questions and Answers:

Need help?

Do you have a question about the Honeywell HF680 Series and is the answer not in the manual?

General

Image Sensor	CMOS
Symbol Contrast	20% minimum reflectance difference
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Light Levels	0 to 100, 000 lux
Supported Barcodes	UPC/EAN, Code 39, Code 128, QR Code, Data Matrix