Honeywell HF680 Series User Manual

HF680 Series User Guide 3
3. Verify the scanner operation by scanning a barcode from the Sample Symbols
in the back of this manual.
The unit defaults to a USB PC Keyboard. Refer to page 8 for other USB terminal
settings.
For additional USB programming and technical information, refer to “USB
Application Note,” available at www.honeywellaidc.com.
Connect with RS232 Serial Port
1. Turn off power to the terminal/computer.
2. Connect the appropriate interface cable to the device.
Note: For the scanner to work properly, you must have the correct cable for your type of
terminal/computer.
HF680 - RS232 Serial Port Connection: HF680M - RS232 Serial Port Connection:

Honeywell HF680 Series Specifications

General

Image Sensor	CMOS
Symbol Contrast	20% minimum reflectance difference
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Light Levels	0 to 100, 000 lux
Supported Barcodes	UPC/EAN, Code 39, Code 128, QR Code, Data Matrix