Honeywell HF680 Series User Manual

Name: Honeywell HF680 Series
Brand: Honeywell
Rating: 4 (1 reviews)

190 pages

To Next Page

To Previous Page

22 HF680 Series User Guide

Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style

terminal and the system is dropping characters. Default = Off.

RS232 Modifiers

RS232 Baud Rate

Baud Rate sends the data from the scanner to the terminal at the specified rate.

The host terminal must be set for the same baud rate as the scanner. Default =

115200.

Automatic Direct Connect

Mode On

* Automatic Direct Connect

Mode Off

300

600

1200

2400

4800

9600

Questions and Answers:

Need help?

Do you have a question about the Honeywell HF680 Series and is the answer not in the manual?

General

Image Sensor	CMOS
Symbol Contrast	20% minimum reflectance difference
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Light Levels	0 to 100, 000 lux
Supported Barcodes	UPC/EAN, Code 39, Code 128, QR Code, Data Matrix