HF680 Series User Guide 123
UTILITIES
Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the Symbology Charts, beginning on page 161) for the single
character code that identifies each symbology.) This action first clears all current
prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary
setting that will be removed when the unit is power cycled.
Show Software Revision
Scan the barcode below to output the current software revision, unit serial number,
and other product information for the scanner.
Show Data Format
See "Show Data Format" on page 54.
Add Code I.D. Prefix to
All Symbologies (Temporary)
To Next Page
Loading...
