HF680 Series User Guide 9
USB HID
Scan the following code to program the scanner for USB HID barcode scanners.
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-based
COM Port. If you are using a Microsoft® Windows® PC, you will need to download a
driver from the Honeywell website (www.honeywellaidc.com). The driver will use the
next available COM Port number. Apple® Macintosh computers recognize the
scanner as a USB CDC class device and automatically uses a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
ACK/NAK Mode
To Next Page
Loading...
