Honeywell HF680 Series User Manual

Name: Honeywell HF680 Series
Brand: Honeywell
Rating: 4 (1 reviews)

190 pages

To Next Page

To Previous Page

CHAPTER

HF680 Series User Guide 29

INPUT/OUTPUT SETTINGS

Power Up Beeper

The scanner can be programmed to beep when it’s powered up. Scan the Off

barcode(s) if you don’t want a power up beep. Default = Power Up Beeper On -

Scanner.

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If

you scan the Beep on BEL On barcode below, the scanner will beep every time a

BEL character is received from the host. Default = Beep on BEL Off.

Power Up Beeper Off -

Scanner

* Power Up Beeper On -

Scanner

*Beep on BEL Off

Beep on BEL On

Questions and Answers:

Need help?

Do you have a question about the Honeywell HF680 Series and is the answer not in the manual?

General

Image Sensor	CMOS
Symbol Contrast	20% minimum reflectance difference
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% (non-condensing)
Light Levels	0 to 100, 000 lux
Supported Barcodes	UPC/EAN, Code 39, Code 128, QR Code, Data Matrix