MAN0597 ISSUE 08 - 02/04
2302M5030
11. APPENDIX A
105
23 Switch on/off to reset Caused by an unexpected switch off,
e.g. poor or intermittent battery
contacts. Switch off instrument and
switch on again.
27 See manual Operating temperature specification
exceeded. Operate instrument within
its specification.
28 Insert valid cartridge Cartridge has been removed whilst
instrument is still switched on. Switch
off and fit cartridge.
34 See manual Memory error. A sensor parameter is
out of the permitted range.
35 Insert valid cartridge Memory fault. Incorrect format.
200 Switch on/off to reset • A generic software fault has
occurred.
• Switch instrument off and back on
to clear the fault.
• If fault persists, contact supplier.
Number Message Action or Reason
To Next Page
Loading...
