Honeywell Notifier AFP-100 User Manual

NCA-2 Manual — P/N 52482:M5 03/20/2019 13
General Description Overview
- Power
- Fire Alarm
- Pre-Alarm
- Security
- Supervisory
- System Trouble
- Other Event
- Signals Silenced
- Point Disabled
- CPU Failure
- Controls Active
• Support for a custom “system-normal” bitmap graphic
• Support for a 160-character display
• Nonvolatile Real-Time Clock (RTC)
• Power supply supervision with AMPS-24 power supply
• Acknowledge (Local, Network-wide or single node)
• Signal Silence (Network-wide or single node)
• System Reset (Network-wide or single node)
• Lamp Test (Local to NCA-2)
• Read Status (any point on a node)
• Alter Status (any point or selected node)
• 4000 Event History capacity
• 1000 Alarm History capacity
• Display and Control Center participation/indication
• Support for Remote Text Display (LCD-160, LCD-80)
• Support for Mass Notification Systems
2.1.2 Compatibility with NOTI•FIRE•NET™ Panel Nodes
Figure 2.2 NCA-2 Network Connection Overview
FACP Network Board
NFS2-640, NFS-640 NCM-W/F, HS-NCM-W/SF/MF/WSF/WMF/MFSF
NFS-320 NCM-W/F, HS-NCM-W/SF/MF/WSF/WMF/MFSF
NFS2-3030, NFS-3030 NCM-W/F, HS-NCM-W/SF/MF/WSF/WMF/MFSF
DVC Series NCM-W/F, HS-NCM-W/SF/MF/WSF/WMF/MFSF
Note: To be compatible with the NCA-2, all networked nodes must be running NOTI•FIRE•NET™ version 5.0 or higher or a high-speed
NOTI•FIRE•NET™.
Table 2.1 NOTI•FIRE•NET™ Compatible Fire Panels
To Noti•Fire•Net or High-Speed
Noti•Fire•Net
To NCA-2
NUP port
NCM-W shown
NCA-2 on network.wmf

Honeywell Notifier AFP-100 Specifications

General

Brand	Honeywell
Model	Notifier AFP-100
Category	Control Panel
Language	English