AM-1224 Installation and programming manual PAGINA - 31
AM-1224_manu Doc. M-124.1-AM1224-ENG Rev A.1 NOTIFIER ITALIA
selecting "View" the user enters the following menu where the devices are displayed by type:
To view the list of excluded items use arrow keys to select desired item, then press enter key
to confirm
the selection.
From “Mask” menù by selecting “Modify” the following will displayed:
In this submenu you can change the state “included/excluded” for the listed items.
Detector line
The display show the first detector line of default. To change line, use function keys.
When a detector is excluded the control panel
can not receive the alarm and trouble signal
from it.
To exclude a line select it with the function
keys F1 or F2.
Once you select a line, press the Enter key
and with arrow key select “ YES ”,
then press enter key
to confirm the
configuration.
Counter number of devices excluded
Press F1 to
modify previous
detector line
Press F2 to
modify next
detector line
To Next Page
Loading...
Need help?
General
