Honeywell SmartLine ST 800 - Figure 31 - Electronic Housing, Display End; Table 24 - Angle and Flat Bracket Parts

102 ST 800 Pressure Transmitter User’s Manual Revision 15
Table 24 – Angle and Flat Bracket Parts
(Refer to Figure 30 )
Key
No.
Part Number
Description
Quantity
Per Unit
1
30752770-503
Carbon Steel Angle Bracket Mounting kit for all models except
Inline and Flush mount transmitters
1
2
30752770-603
SS 304 Angle Bracket Mounting kit for all models except In- line
and Flush mount transmitters
1
3
30752770-604
SS 304 Angle Bracket Mounting kit for all In-Line and Flush
mount transmitters
1
4
32300808-501
Carbon Steel Marine Approved Mounting Bracket for all models
except In-line and Flush mount transmitters
1
5
32300808-502
SS 304 Marine Approved Mounting Bracket for all models except
In-line and Flush mount transmitters
1
6
32300808-503
SS 316 Marine Approved Mounting Bracket for all models except
In-line and Flush mount transmitters
1
7
32300808-504
Carbon Steel Marine Approved Mounting Bracket for all In- Line
and Flush mount transmitters
1
8
32300808-505
SS 304 Marine Approved Mounting Bracket for all In-Line and
Flush mount transmitters
1
9
32300808-506
SS 316 Marine Approved Mounting Bracket for all In-Line and
Flush mount transmitters
1
10
51196557-505
SS 304 Flat Bracket Mounting kit for all models except In-line and
Flush mount transmitters
1
11
51196557-506
SS 304 Flat Bracket Mounting kit for all In-line transmitters and
Flush mount transmitters
1
12
30752770-903
SS 316 Angle Bracket Mounting kit for all In-line transmitters
except In-Line and Flush mount transmitters
1
13
30752770-904
SS 316 Angle Bracket Mounting kit for all In-Line and Flush
mount transmitters
1
14
51196557-508
SS 316 Flat Bracket Mounting kit for all In-line transmitters
except In-Line and Flush mount transmitters
1
15
51196557-509
SS 316 Flat Bracket Mounting kit for all In-Line and Flush mount
transmitters
1
Figure 31 – Electronic Housing, Display End