7 ST 800 Pressure Transmitter User’s Manual Revision 15
3 Installation and Startup
3.1 Installation Site Evaluation
Evaluate the site selected for the ST 800 transmitter installation with respect to the process system design
specifications and Honeywell’s published performance characteristics for your particular model. Some
parameters that you may want to include in your site evaluation are:
• Environmental Conditions:
o Ambient Temperature
o Relative Humidity
• Potential Noise Sources:
o Radio Frequency Interference (RFI)
o Electromagnetic Interference (EMI)
• Vibration Sources
o Pumps
o Motorized System Devices (e.g., pumps)
o Valve Cavitation
• Process Parameters
o Temperature
o Maximum Pressure Rating
3.2 Honeywell Versatilis Configurator
The Honeywell Versatilis Configurator, hereinafter referred as HVC in this document, consists of the
Advanced Communication Interface and Honeywell Versatilis Configurator app. It is a next-generation
universal handheld solution for configuring, calibrating, monitoring and diagnosing field devices. It
converts conventional field devices to smart field devices and lets them communicate with the
Honeywell Versatilis Configurator through Bluetooth.
For more information, refer to the ‘Setup’ section in the Honeywell Versatilis Configurator User Manual,
34-ST-25-70 (click the link and navigate to the ‘Support’ tab to access the manual) for device operation
and maintenance.
To Next Page
Loading...
Need help?
General
