Call up the main menu. Call
up a lower-level menu.
Select an item for data entry. Confirm a
data entry operation Activate the
service associated with a selected menu
item.
4.2.1 Menu Navigation
The behavior of the buttons is the same for basic, standard and advanced displays. The user must press
button to call up the main menu. To exit the main menu and return to the PV display screen, select <EXIT>.
When on a lower-level menu, return to the menu above by selecting <Return>. Alternately, the (up) and
(down) buttons can be pressed simultaneously to return to the menu above. When on the highest-level
menu, or when using the basic display menu, pressing the (up) and (down) buttons simultaneously will
exit the menu and return to the PV display.
Use the and buttons to scroll through the list of menu items. Press the button to select an item for
data entry or activation. When an item is selected for data entry or activation, the cursor will jump to the
lower line of the LCD (basic display) or call up a pop-up window (standard / advanced display) to allow
editing of the value. No action is taken against a menu item until the button is pressed.
If a user presses the button to begin a data entry operation, they must press another button within 10
seconds, or the transmitter firmware will assume that the user wants to abort the operation or has walked
away from the transmitter. After 10 seconds with no action, the data entry will time out and the original
value of the parameter will be preserved.
If no button presses occur within 60 seconds, menu access will time out and the transmitter will exit the
menu and return to the PV display.
To Next Page
Loading...
