Honeywell SmartLine ST 800 - Index

122 ST 800 Pressure Transmitter User’s Manual Revision 15
Approval Certifications: (Continued)
NEPSI
China
Flameproof:
Ex d IIC Ga/Gb T4
Ex tb IIIC Db T 85
o
C
All
Note 1
-50 ºC to 85ºC
Intrinsically Safe:
Ex ia IIC Ga T4
FISCO Field Device (Only for FF Option)
Ex ia IIC T4
4-20 mA / DE/
HART
Note 2a
-50 ºC to 70ºC
Foundation
Fieldbus
Note 2b
-50 ºC to 70ºC
Nonincendive:
Ex nA IIC Gc T4
4-20 mA / DE/
HART/ Foundation
Fieldbus
Note 1
-50 ºC to 85ºC
Enclosure : IP 66/67
All
All
-
EAC
Russia, Belarus
and
Kazakhstan
Flameproof:
1 Ex d IIC Ga/Gb T4
Ex tb IIIC Db T 85
o
C
All
Note 1
-50 ºC to 85ºC
Intrinsically Safe:
0 Ex ia IIC Ga T4
FISCO Field Device (Only for FF Option)
Ex ia IIC T4
4-20 mA / DE/
HART
Note 2a
-50 ºC to 70ºC
Foundation
Fieldbus
Note 2b
-50 ºC to 70ºC
Enclosure : IP 66/67
All
All
KOSHA
Korea
Flameproof :
Ex d IIC T6..T5
Ex tD T 95
o
C
All
Note 1
T6: Ta= -50 ºC to
65ºC
T5: Ta= -50 ºC to
85ºC
Intrinsically Safe:
Ex ia IIC T4
4-20 mA / DE/
HART
Note 2a
Ta= -50 ºC to 70ºC
Foundation
Fieldbus
Note 2b and 2c
Ta= -50 ºC to 70ºC
Enclosure: IP66/ IP67
All
All
-
Notes:
1. Operating Parameters:
Voltage= 11 to 42 V DC
= 10 to 30 V (FF)
Current= 4-20 mA Normal
= 30 mA (FF)
2. Intrinsically Safe Entity Parameters
a. Analog/ DE/ HART Entity Values:
Vmax= Ui = 30V
Imax= Ii= 105mA
Ci = 4.2nF
Li =984 uH
Pi =0.9W
Transmitter with Terminal Block Revision E or Later
Vmax= Ui = 30V
Imax= Ii= 225mA
Ci = 4.2nF
Li = 0
Pi =0.9W
Note : Transmitter with Terminal Block Revision E or later
The revision is on the label that is on the module. There will be two lines of text on the label:
• First is the module Part #: 50049839-001 or 50049839-002
• Second line has the supplier information, along with the REVISION:
XXXXXXX-EXXXX, THE “X” is production related, THE POSITION of the “E” IS THE REVISION.
b. Foundation Fieldbus- Entity Values