Honeywell Xenon Series User Manual

166 Xenon/Granit User Guide
To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the Programming Chart, beginning on
page 353.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code from the
Programming Chart, beginning on page 353.
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the Programming Chart, beginning on
page 353.
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay

Honeywell Xenon Series Specifications

General

IP Rating	IP42
Connectivity	USB, RS-232, Keyboard Wedge, IBM 46XX, Synapse, USB-CDC
Decode Capabilities	1D and 2D barcodes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Light Levels	Ambient light up to 100, 000 lux
Field of View	Horizontal: 41.4°; Vertical: 32.2°
Interface	USB, RS-232, Keyboard Wedge, IBM 46XX
Humidity	5% to 95% (non-condensing)
Dimensions	104 mm x 71 mm x 160 mm (4.1 in x 2.8 in x 6.3 in)
Drop Resistance	Withstands 50 drops at 1.8 m (6 ft) to concrete
Drop Specification	Withstands 50 drops at 1.8 m (6 ft) to concrete