Xenon/Granit User Guide 277
RS232 Handshaking *RTS/CTS Off 232CTS0 40
Flow Control, No Timeout 232CTS1 39
Two-Direction Flow Control 232CTS2 40
Flow Control with Timeout 232CTS3 40
RS232 Timeout 232DEL#### 40
*XON/XOFF Off 232XON0 40
XON/XOFF On 232XON1 40
*ACK/NAK Off 232ACK0 41
ACK/NAK On 232ACK1 41
Scanner-Bioptic Packet Mode *Packet Mode Off 232PKT0 41
Packet Mode On 232PKT2 41
Scanner-Bioptic ACK/NAK Mode *Bioptic ACK/NAK Off 232NAK0 42
Bioptic ACK/NAK On 232NAK1 42
Scanner-Bioptic ACK/NAK Timeout ACK/NAK Timeout
*5100
232DLK##### 42
Cordless System Operation: Xenon 1902g/1912 and Granit 1911i/1981i
This section applies only to cordless systems. It does not apply to corded scanners or Xenon 1902g-BF
scanners.
Replace a Linked Scanner Override locked Scanner (Single
Scanner)
BT_RPL1 45
Temporary Streaming Presentation
Mode
*Temporary Streaming
Presentation Mode On
BEPPGE2 48
*10 Second Timeout TRGTPM10000 49
60 Second Timeout TRGTPM60000 49
Base Power Communication
Indicator
*On :*:BASRED1 52
Off :*:BASRED0 52
Reset Scanner Reset Scanner RESET_ 52
Scan While in Base Cradle Scan in Cradle Off BT_SIC0 53
*Scan in Cradle On (CCB01-
010BT default)
BT_SIC1 53
Shut Down Scanner in Cradle BT_SIC2 53
Base Charge Modes Base Charge Off BASCHG0 53
*External or Interface Cable Power BASCHG1 53
External Power Only BASCHG2 54
Page Mode *On BEPPGE1 54
Off BEPPGE0 54
Page Pitch Range 400 - 9000 Hz (*1000) BEPPFQ#### 54
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page