Honeywell Xenon Series User Manual

294 Xenon/Granit User Guide
GS1-128 Default All GS1-128 Settings GS1DFT 204
*On GS1ENA1 204
Off GS1ENA0 204
GS1-128 Message Length Minimum (1 - 80) *1 GS1MIN## 205
Maximum (0 - 80) *80 GS1MAX## 205
Telepen Default All Telepen
Settings
TELDFT 205
*Off TELENA0 205
On TELENA1 205
Telepen Output *AIM Telepen Output TELOLD0 205
Original Telepen Output TELOLD1 205
Telepen Message Length Minimum (1 - 60) *1 TELMIN## 206
Maximum (1 - 60) *60 TELMAX## 206
UPC-A Default All
UPC-A Settings
UPADFT 206
Off UPBENA0 206
*On UPBENA1 206
UPC-A Check Digit Off UPACKX0 207
*On UPACKX1 207
UPC-A Number System Off UPANSX0 207
*On UPANSX1 207
UPC-A 2 Digit Addenda *Off UPAAD20 207
On UPAAD21 207
UPC-A 5 Digit Addenda *Off UPAAD50 207
On UPAAD51 207
UPC-A Addenda Required *Not Required UPAARQ0 208
Required UPAARQ1 208
Addenda Timeout Range (0 - 120) *500 DLYADD##### 208
UPC-A Addenda
Separator
Off UPAADS0 208
*On UPAADS1 208
UPC-A/EAN-13 with Extended
Coupon Code
*Off CPNENA0 209
Allow Concatenation CPNENA1 209
Require Concatenation CPNENA2 209
Addenda Timeout Range (0 - 120) *500 DLYADD##### 209
Coupon GS1 DataBar Output GS1 Output Off CPNGS10 210
GS1 Output On CPNGS11 210
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page

Honeywell Xenon Series Specifications

General

IP Rating	IP42
Connectivity	USB, RS-232, Keyboard Wedge, IBM 46XX, Synapse, USB-CDC
Decode Capabilities	1D and 2D barcodes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Light Levels	Ambient light up to 100, 000 lux
Field of View	Horizontal: 41.4°; Vertical: 32.2°
Interface	USB, RS-232, Keyboard Wedge, IBM 46XX
Humidity	5% to 95% (non-condensing)
Dimensions	104 mm x 71 mm x 160 mm (4.1 in x 2.8 in x 6.3 in)
Drop Resistance	Withstands 50 drops at 1.8 m (6 ft) to concrete
Drop Specification	Withstands 50 drops at 1.8 m (6 ft) to concrete